Rinnai R94LSI-P and R75LSI-P Tankless Propane Water Heaters

Posted in Rinnai | 2 comments

For indoor installation only Rinnai’s LS Series mount units can be placed in any room, vent directly to the outside and have an integrated condensate collector. All LS units contain a newly designed, commercial-grade heat exchanger for optimum durability. Homeowners get the reliability of commercial-grade construction in a redesigned in home model.

Enjoy hot water from five outlets at the same time while using 40% less energy. EZ connect features make it simple to connect more than one unit to your system should you need them. The space it will save is amazing and the sleek look that Rinnai has chosen makes these LSI units even more appealing.

Fist Class Plumbing recommends these Rinnai models for Propane water heating solutions.
The LSI-P vents outside through a typical concentric venting system.

Remember these facts from Rinnai;

The service life is up to 20 years which is 2-3 times longer than the old, bulky water heaters.
Lowers your energy bill by 40%! Over the course of it’s lifespan that more than pays for itself!
Conserving water in all capacities, the Rinnai model is compact and easy installable in the most
efficient way to save that “wasted water” between calls for hot water.
Rinnai’s 5 year Labor Warranty and extended coverage for up to 5 more years!

 

 

The Rinnai R94LSI-P Features and Specs.

Rinnai R94LSI-P Interior, 9.4 GPM, Liquid Propane, 84% Efficiency Tankless Water Heater Features:
• Sleek, modern design with silver finish and sculpted cover
• Applicable for both residential and commercial applications due to commercial-grade heat exchanger
• Temperature range with standard MC-91 controller (included): 98 Degree Farenhieght to 140 Degree Farenhieght
• Temperature range with MCC-91 commercial controller: 98 Degree Farenhieght to 160 Degree Farenhieght
• Digital temperature control, monitoring, and troubleshooting
• EZConnect feature for connecting 2 or more units; 3 or more units can be manifolded using our MSA control board

Rinnai R94LSI-P Interior, 9.4 GPM, Liquid Propane, 84% Efficiency Tankless Water Heater Specifications:
• Maximum / Minimum Gas Rate: 199,000 / 15,000 Input BTUs
• Hot Water Capacity Range: 0.6 to 9.4 GPM
• Fuel Type: Liquid Propane
• Energy Factor: 0.82
• Temperature Range: 98 to 140 Degree Farenhieght
• Dimensions (WxDxH): 14W x 10D x 26H Inches

 

 

The Rinnai R75LSI-P Features and Specs

Rinnai R75LSI-P Interior, 7.5 GPM, Liquid Propane, 84% Efficiency Tankless Water Heater Features:
• Sleek, modern design with silver finish and sculpted cover
• Applicable for both residential and commercial applications due to commercial-grade heat exchanger
• Temperature range with standard MC-91 controller (included): 98 Degree Farenhieght to 140 Degree Farenhieght
• Temperature range with MCC-91 commercial controller: 98 Degree Farenhieght to 160 Degree Farenhieght
• Digital temperature control, monitoring, and troubleshooting
• EZConnect feature for connecting 2 or more units; 3 or more units can be manifolded using our MSA control board

Rinnai R75LSI-P Interior, 7.5 GPM, Liquid Propane, 84% Efficiency Tankless Water Heater Specifications:
• Maximum / Minimum Gas Rate: 180,000 / 15,000 Input BTUs
• Hot Water Capacity Range: 0.6 to 7.5 GPM
• Fuel Type: Liquid Propane
• Energy Factor: 0.82
• Temperature Range: 98 to 140 Degree Farenhieght
• Dimensions (WxDxH): 14W x 10D x 26H Inches

2 Comments

  1. 6-11-2012

    Need something for remote location (i.e. no elect.)What kind of water supply is needed to maintain these units.(pressure and vol.)as we are gravity fed.

    • 3-14-2016

      You won’t be able to use this then. It requires 120-volt electric to run the blower, thermostat, and pilot ignitor. Also, gravity fed won’t work. It won’t provide enough flow to turn the heater on.

Leave a Comment

Your email address will not be published. Required fields are marked *